SNOT techniques

From Brickwiki

There are many ways to make MOCs with SNOT in them.

Contents 1 Definition 2 SNOT Parts 2.1 Stud side SNOT parts 2.2 Others SNOT parts 3 Elementary SNOT 3.1 Basic Geometry 4 Intermediate SNOT 4.1 SNOT 90 4.2 SNOT 180 5 Advanced SNOT 6 External references 6.1 SNOT techniques

Definition

SNOT is an acronym for Studs Not On the Top.

SNOT techniques deal with all ways of building not stacking parts with studs on the top.

SNOT techniques are innovative ways to create shapes that could not be realized another way. In this way, MOC's are more detailed.

SNOT is a very general term and there are many different SNOT techniques.

SNOT Parts

Stud side SNOT parts

cotrdr

Some parts are designed for making SNOT building easy. These parts present stud(s) on their side.

• Brick 1 x 1 with Headlight (Erling's brick)

• Studs on Sides bricks
  • Brick 1 x 1 with Studs on Two Opposite Sides
  • Brick 1 x 1 with Studs on Four Sides (Dalek brick)
  • Brick 1 x 2 with Studs on Two Opposite Sides
  • Brick 1 x 4 with Studs on Side
  • Brick 2 x 4 x 2 with Studs on Sides

• Brackets
  • Bracket 1 x 2 - 1 x 4
  • Bracket 1 x 2 - 2 x 2
  • Bracket 2 x 2 - 1 x 4
  • Bracket 2 x 2 - 2 x 2

Others SNOT parts

• Hinges bricks
• Fences
• Technic brick

Side hole SNOT parts can be turned into Side stud SNOT part using Technic half pin.

Elementary SNOT

Basic Geometry

cotrdr

LEGO bricks have a very simple geometry rule which can be summarised in two ways. It can be thought of as the 5:2 rule (5 plates height = 2 bricks length) or the 5:6 rule (5 bricks height= 6 bricks length). These can be seen in the accompanying image. Of course either of these can be rotated 90 degrees.

If you keep these rules in mind, building SNOT structures becomes much quicker and easier as you can always know how much space you need to fill. Also note that SNOT must always (some rare exceptions exist) involve even numbers of bricks lengthwise or a multiple of 40LDUs (40, 80, 120 etc.) in that notation.

Intermediate SNOT

SNOT 90

SNOT 180

cotrdr

cotrdr

SNOT generally turns the global orientation of the building about 90 degrees. Combining two SNOT 90 structures leads to a U-turn. But there also exist SNOT techniques that immediatly lead to a U-turn; these are called SNOT 180 techniques.

These can come in handy when a piece is not available in an 'upside-down' version (such as some slopes) or when you are creating studless models. As with any technique there are endless possibilities and these are just some examples.

One of the best parts for doing a SNOT 180 is Technic Plate 1 x 4 with Holes as it allows a 180 reversal of direction in one plate thickness (see the figure at right). James Mathis used this to great effect in his bufferless truck design as seen in his El Capitan project...

You can also make a tiny SNOT 180 with studs outside using the plate 1x1 with Clip Light. If you use the type 2 of this part (the newer version), the space between the two plate is one plate, as you can see with the yellow part on the picture beside.

Advanced SNOT

External references

SNOT techniques

• SNOT Sphere Generator for LDraw (Bram Lambrecht)
• Train SNOT (ILTCO)
• [http://www.holgermatthes.de/bricks_us/snot.htm SNOT
• LEGO SNOT Building Tips (Brickplayer Article)